ICT Conference 2024

ICT Conference 2024

Dear iCT-Community,
the University of Applied Sciences Upper Austria is planning its 13th Conference
on Industrial Computed Tomography (iCT2024) together with the DGZfP, SGZP
and ÖGfZP.

The conference will be held on the 6th -  9th February 2024 in Wels, Austria.

art'23 | non-destructive investigations

art'23 | non-destructive investigations

14th International Conference on non-destructive investigations and microanalysis for the diagnostics and conservation of cultural and environmental heritage

16. Werkstofftagung | IMAT

16. Werkstofftagung | IMAT

Die 16. Werkstofftagung steht unter dem Motto Smarte Werkstoffe und Verarbeitungsprozesse. Es sind Vorträge von Forschungspartnern aus diesen Bereichen geplant, sowie interne IMAT-Beiträge, die neueste Trends und Ergebnisse präsentieren.

ECNDT

ECNDT

Welcome to ECNDT 2023 in Lisbon!

The Portuguese Society of NDT FSEND-RELACRE has the honor to host the European Conference on Non-Destructive Testing to be held on 3rd-7th July 2023 in Lisbon, Portugal. https://ecndt2023.org/

7. International Conference of Engineering Against Failure

7. International Conference of Engineering Against Failure

The scope of the Conference is to attract interdisciplinary work dedicated to: the design against engineering failure, the implementation of appropriate guidelines against failure, the development and application of concepts and technologies to prevent of failure, the use of both, novel and established approaches, technologies, and tools for failure analysis, as well as the deep understanding of the underlying failure mechanisms and the identification of the failure root causes.

ÖGS | Gesundheits-, Arbeits- und Umweltschutz in der Schweißtechnik

ÖGS | Gesundheits-, Arbeits- und Umweltschutz in der Schweißtechnik

Wir dürfen Sie zum

31. ÖGS-Workshop "Gesundheits-, Arbeits- und Umweltschutz in der Schweißtechnik",

der am 20. Juni 2023 in Brunn am Gebirge stattfindet, recht herzlich einladen.

DACH-Jahrestagung 2023

DACH-Jahrestagung 2023

Der Bodensee ist mit seinem malerischen Städtchen Friedrichshafen erneut der Austragungsort der DACH-Jahrestagung 2023. Nach überwältigender positiver Resonanz zur DACH-Jahrestagung 2019 fiel die erneute Wahl auf die Stadt am Drei-Ländereck.

iCT 2023

iCT 2023

12TH INTERNATIONAL CONFERENCE ON INDUSTRIAL COMPUTED TOMOGRAPHY

Inspektion von Oberflächen mit Bildverarbeitung

Inspektion von Oberflächen mit Bildverarbeitung

Zu diesem Themenkomplex veranstaltet Fraunhofer Vision am 7. und 8. Dezember 2022 in Karlsruhe das nächste Seminar »Inspektion und Charakterisierung von Oberflächen mit Bildverarbeitung«, zu dem wir Sie herzlich einladen.

ÖGS-Workshop "Hartlöten“

ÖGS-Workshop "Hartlöten“

Wann werden Kälteanlagen zu Druckgeräten?
Was bedeutet das für deren Herstellung und Instandhaltung?
Was sind kritische Einflussfaktoren beim Löten?
Wie können Lötverbindungen zerstörungsfrei geprüft werden?

SINCE 2022

SINCE 2022

The fourth iteration of the Singapore International Non-destructive Testing Conference
and Exhibition (SINCE2022) organised by Non-Destructive Testing Society Singapore
(NDTSS) will take place at the iconic Marina Bay Sands Resort and Convention Centre,
Singapore from 7-8th November 2022.

Internat. Conference on NDE 4.0

Internat. Conference on NDE 4.0

Innovative Technologien wie künstliche Intelligenz, Big Data oder Augmented Reality ermöglichen es, die Daten auszuwerten und zu visualisieren. Blockchains erlauben eine änderungssichere Speicherung und Rückverfolgbarkeit der Daten und 5G die von der Industrie 4.0 benötigten drahtlosen Verbindungen.

14. Technologietag des Geschäftsbereichs Vision

14. Technologietag des Geschäftsbereichs Vision

Innovative Technologien für die industrielle Qualitätssicherung mit Bildverarbeitung
 

2nd Seminar NDT in Railway

2nd Seminar NDT in Railway

Non-destructive testing of railway components is one of the key technologies for reliable and sustainable operation of high density and high quality rail services.

Netzwerk ZfP 2022

Netzwerk ZfP 2022

Praxis trifft Forschung - unter diesem Titel definieren wir unsere Tagung Netzwerk ZfP neu.

2. Seminar Wirbelstromprüfung

2. Seminar Wirbelstromprüfung

Der Fachausschuss Wirbelstromprüfung, der sich mittlerweile nach seiner 4. offiziellen Sitzung etabliert und gut positioniert hat, möchte hiermit sein 2. Fachseminar Wirbelstromprüfung ankündigen und zu den Beiträgen aufrufen.

Numerical Analysis of Weldability

Numerical Analysis of Weldability

The 13th International Seminar "Numerical Analysis of Weldability" will take place from 4 - 7 September 2022 in Graz - Castle Seggau - Austria. The seminar is organized by the Institute for Materials Science, Joining and Forming (IMAT) at Graz University of Technology (TU Graz) in Austria.

ICARST2022

ICARST2022

The International Atomic Energy Agency (IAEA) is organizing the Second International Conference on Applications of Radiation Science and Technology (ICARST-2022).

SMiRT 26 | Terminverschiebung

SMiRT 26 | Terminverschiebung

26. International Conference on Structural Mechanics in Reactor Technology

DGZfP-Jahrestagung 2022

DGZfP-Jahrestagung 2022

Im kommenden Jahr lädt die Deutsche Gesellschaft für Zerstörungsfreie Prüfung zur DGZfP-Jahrestagung vom 23. bis 25. Mai 2022 in das nordhessische Kassel ein. Nach zwei Jahren, in denen pandemiebedingt keine Präsenztagung stattfand, treffen sich die ZfP-Interessierten nun zum persönlichen Austausch wieder.

ZfP im Eisenbahnwesen

ZfP im Eisenbahnwesen

Der DGZfP-Fachausschuss ZfP im Eisenbahnwesen lädt zu seiner 12. Fachtagung vom 15. – 17. März 2022 wieder nach Erfurt in das Kongresszentrum der Messe Erfurt ein. Unsere Einladung richtet sich an Anwender und Dienstleister aller Bereiche der zerstörungsfreien Prüfung im Eisenbahnwesen und bei Stadtbahnen sowie an Fachleute aus Forschung und Entwicklung.

Industrial Computed Tomography | iCT2022

Industrial Computed Tomography | iCT2022

The University of Applied Sciences Upper Austria is planning its 11. Conference on Industrial Computed Tomography (iCT2022) together with the DGZfP, SGZP and ÖGfZP.

15. Werkstofftagung IMAT

15. Werkstofftagung IMAT

Die 15. Werkstofftagung des IMAT findet am 18. November 2021 in der AULA der TU Graz statt und  ist  dem  Thema  „Additive  Fertigung  von  performanten  und  hybriden Strukturen“ gewidmet.

Konventionelle und innovative Anwendungen der Ultraschallprüfverfahren

Konventionelle und innovative Anwendungen der Ultraschallprüfverfahren

Der DGZfP-Fachausschuss Ultraschallprüfung veranstaltet vom 10. – 11. November 2021 sein nächstes Seminar mit dem Titel Konventionelle und innovative Anwendungen der Ultraschallprüfverfahren. In diesem Jahr findet das Seminar im Pentahotel Berlin Köpenick statt.

International Ultrasonic Testing Online Conference 2021

International Ultrasonic Testing Online Conference 2021

  • open access - online - on-demand
  • 1 to 30 November 2021
ENDT&CM DAYS 2021

ENDT&CM DAYS 2021

Following the 1st ENDT Days in 2007 and the highly successful European Conference ECNDT 2014 in Prague, the Czech society for NDT in cooperation with other NDT & CM Societies is preparing another important meeting of experts and users from the NDT, including Condition Monitoring and Structural Health Monitoring areas for 2021.

Innovative und simulationsbasierte Prozess- und Fertigungsplanung von Schweißkonstruktionen

Innovative und simulationsbasierte Prozess- und Fertigungsplanung von Schweißkonstruktionen

Das Seminar soll Ihnen einen Überblick zu den vielfältigen Einsatzmöglichkeiten der
Schweißsimulation geben. Bei der Anwendung der Schweißsimulation steht eine zielorientierte
Planung für die Schweißkonstruktion im Fokus, bei der im Vorfeld alle Parameter soweit eingestellt und abgeprüft sind, dass die Fertigung ohne Zeitverlust und Kosten durch Ausschuss starten kann.

EUROMAT 2021

EUROMAT 2021

EUROMAT 2021, the EUROPEAN CONGRESS AND EXHIBITION ON ADVANCED MATERIALS AND PROCESSES, to be held September 12-16, 2021 in Graz, Austria.

Integrated Computational Materials, Process and Product Engineering

Integrated Computational Materials, Process and Product Engineering

Leoben Forschung GmbH and ASMET invite to the the international conference
Integrated Computational Materials, Process and Product Engineering
(IC-MPPE 2022) on 5.& 6. May. 2022 in Leoben, Austria

DGZfP-Jahrestagung 2021

DGZfP-Jahrestagung 2021

Die Deutsche Gesellschaft für Zerstörungsfreie Prüfung lädt herzlich zur virtuellen Jahrestagung 2021 vom 10. bis 12. Mai ein.

1st International Conference on NDE 4.0

1st International Conference on NDE 4.0

We announce the 1st International Conference on NDE 4.0. It will be held April 14/15/20/21 2021 (virtually). The face to face conference on this topic will follow one year later in April 2022 in Munich, Germany.

IMEKO TC & EUROLAB

IMEKO TC & EUROLAB

The International Measurement Confederation IMEKO, Technical Committee 10 on Testing, Diagnostics & Inspection and EUROLAB aisbl kindly invite you to attend the 17th IMEKO TC 10 Conference: “Global Trends in Testing, Diagnostics & Inspection for 2030” to be held in Dubrovnik, Croatia, on October 19-22, 2020.

3-Länder-Korrosionstagung

3-Länder-Korrosionstagung

Die korrosionssichere Anlage - Herausforderungen und Lösungen

14. Werkstofftagung IMAT

14. Werkstofftagung IMAT

Wir laden Sie herzlich ein, an der

14. Werkstofftagung des IMAT - Institut für Werkstoffkunde, Fügetechnik und Umformtechnik
am 28. November 2019

teilzunehmen und einige interessante Stunden mit uns bei Präsentationen, Diskussionen, Vorführungen und freundschaftlichen Gesprächen zu verbringen.


Nähere Informationen finden Sie hier:

Programm
11th International Symposium on NDT in Aerospace

11th International Symposium on NDT in Aerospace

We are pleased to inform you that this year the 11th International Symposium on NDT in aerospace will take place in France, organized by the COFREND in partnership with CEA LIST.

The symposium will be held in Paris-Saclay, November 13th  to 15th , 2019.

Non-Destructive Testing and Evaluation (NDT&E) is one of the major requirements in aerospace structural design. Appropriate use of NDT guarantees safety in aerospace and is thus a subject of highest attention. The Symposium on NDT in Aerospace has been established in 2008 and is organized on an annual basis to allow to communicate on the latest R&D achievements and to discuss on advanced and improved methods between scientists as well as researchers and industrials. Since 2010, the symposium always takes place at a location where aerospace has a home.

Around 200 participants from twenty countries are expected to attend this event, which will include over 100 technical presentations. During the symposium an exhibition of NDT materials and equipment will take place, followed by industrial visits.

More information, on venue and on the program will follow soon.

Do not hesitate to contact us for any question.

With our Best Regards

Cofrend logo-RVB

Pole Communication

Maison des END – 64 Rue Ampère – 75017 Paris

Tel : + 33 (0)1 44 19 05 30 - Cell : + 33 (0)6 01 31 54 24

pole(dot)communication(at)cofrend(dot)com - http://www.cofrend.com/

Phased Array Ultrasonic Testing of welds in thin-walled materials

Phased Array Ultrasonic Testing of welds in thin-walled materials

KINT SYMPOSIUM 2019

Phased Array Ultrasonic Testing (PAUT) of welds in thin-walled materials To be held on 30-31 October 2019 at Shell Technology and Research Centre, Amsterdam.

Vereniging KINT
Krombraak 13
4906 CR Oosterhout
The Netherlands

Mobiel:            +31 653 351 073
E-mail:             info(at)kint(dot)nl
Direct:             voorzitter(at)kint(dot)nl
Website:          www.kint.nl
Linkedin:          www.linkedin.com/groups/4802955

 

Laser-Ultrasound for Metals

Laser-Ultrasound for Metals

4th International Workshop on

Laser-Ultrasound for Metals

ISNDCM 2019

ISNDCM 2019

International Symposium on Nondestructive Characterization of Materials

17-19 September, 2019

At the Grand Hotel Bernardin in Portorož, Slovenia

 

Organized by: The American Society for Nondestructive Testing

Hosted by: The Slovenian Society for Nondestructive Testing

 

The main focus of the ISNDCM conference is the use of nondestructive evaluation methods as an investigation tool to determine the materials properties, characterize parts of materials or features detected within them. This symposium encourages papers addressing issues of current and future interest, covering both theoretical and experimental work. Of considerable interest will be state-of-the-art developments and applications where the complex nature of materials is recognized. Furthermore, discussions on the applications and possibilities for multi-technique measurements of interdependent parameters and the evaluation of the data through sophisticated computer analyses are also encouraged. More details and specifics about the abstract submission process are available in the attached document.

Your expertise and knowledge from the field would significantly contribute to the high standards of the symposium.

 

https://www.asnt.org/MajorSiteSections/Events/Upcoming_Events/ISNCM_2019.aspx

Conferences ICASP-5 – CSSCR-5

Conferences ICASP-5 – CSSCR-5

5th International Conference on Advances in Solidification Processes (ICASP-5)

5th International Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR-5)

Spanish AEND Conference

Spanish AEND Conference

On 12, 13 and 14 June 2019 the city of Vitoria-Gasteiz will host the 14th annual Spanish NDT Conference at the Europa Conference Centre, and it is my pleasure to invite you to participate as attendees, speakers, exhibitors or companions.

D.A.CH. Jahrestagung 2019

D.A.CH. Jahrestagung 2019

ZfP in Forschung, Entwicklung und Anwendung

Metal Magnetic Memory Method

Metal Magnetic Memory Method

3rd Int. Conference on Diagnostics of Structures and Components using Metal Magnetic Memory Method

iCT 2019

iCT 2019

9th International Conference on Industrial Computed Tomography
from 13. to 15. February in Padova, Italy

3rd Metal Additive Manufacturing Conference

3rd Metal Additive Manufacturing Conference

We have the pleasure to announce the 3rd MAMC2018 "Metal Additive Manufacturing Conference"  from November 21-23, 2018, which will be held at the WKO in Vienna.

1st ICWNDT-2018 of HSNT-WGI

1st ICWNDT-2018 of HSNT-WGI

1st International Conference on Welding and Non Destructive Testing (1st ICWNDT-2018)/6th ICNDT of HSNT which is co-organized together with the 1st ICW of WGI on 22-24 october in Athens, Greece.

ICSTI

ICSTI

International Congress on the Science and Technology of Ironmaking

Numerical Analysis of Weldability

Numerical Analysis of Weldability

The seminar is organized by the Institute for Materials Science, Joining and Forming (IMAT) at Graz University of Technology (TU Graz) in Austria.

CM 2018 and MFPT 2018 Conference

CM 2018 and MFPT 2018 Conference

The British Institute of Non-Destructive Testing (BINDT) is pleased to invite you to this premier event, the Fifteenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies.

Conference on Structural Health Monitoring | EWSHM

Conference on Structural Health Monitoring | EWSHM

The European Workshop on Structural Health Monitoring Series (EWSHM) is taking place next year from 10-13 July and will be held at the Hilton Manchester Deansgate in Manchester, UK.

ICOLD Austria | High Strength Steels in Hydropower Plants

ICOLD Austria | High Strength Steels in Hydropower Plants

On behalf of the Austrian National Committee on Large Dams, it is my great honor to invite you to the 26th ICOLD World Congress in combination with the 86th ICOLD Annual Meeting and the ATCOLD Symposium Hydro Engineering, to be held in Vienna.

ECNDT 2018

ECNDT 2018

The 12th European Conference in NDT (ECNDT) takes place June 11-15, in Gothenburg, Sweden. The conference is a part of the EFNDT and is co-arranged by the societies for non-destructive testing in Sweden, Norway, Finland and Denmark.

Fatigue 2018

Fatigue 2018

12th International Fatigue Congress

9. ÖGfZP Netzwerk ZfP

9. ÖGfZP Netzwerk ZfP

Einblick in die betriebliche Umsetzung von ZfP Anwendungen am 17. Mai im Rahmen der Intertool in Wien.

Forum für Metallurgie und Werkstofftechnik

Forum für Metallurgie und Werkstofftechnik

Digitalisierung in der metallerzeugenden und -verarbeitenden Industrie

DGZfP Jahrestagung

DGZfP Jahrestagung

Erstmals lädt die Deutsche Gesellschaft für Zerstörungsfreie Prüfung zur DGZfP-Jahrestagung 2018 vom 7. bis 9. Mai 2018 nach Leipzig ein.

MMM conference

MMM conference

DIAGNOSTICS OF STRUCTURES AND COMPONENTS USING METAL MAGNETIC MEMORY METHOD

ICT 2018

ICT 2018

The University of Applied Sciences Upper Austria is planning its 8. Conference on Industrial Computed Tomography together with the DGZfP, SGZP and ÖGfZP as well as the DGM Tomography Research Group. It will be held on 6.-9. February 2018 in Wels (A).

13. Werkstofftagung

13. Werkstofftagung

Die 13. Werkstofftagung des IMAT (Institut für Werkstoffkunde, Fügetechnik und Umformtechnik) findet am 6. Dezember 2017 in der AULA der TU Graz statt und ist dem Thema „Verformbarkeit und Formgebung metallischer Hochleistungswerkstoffe“ gewidmet.

3-Länder-Korrosionstagung

3-Länder-Korrosionstagung

Im Rahmen dieser Tagung werden die Teilnehmer in ausgewählten Vorträgen aus erster Hand, von Experten der Automobilbranche über neue Veränderungen im Korrosionsschutz informiert.

 

27. Spektrometertagung, ASMET

27. Spektrometertagung, ASMET

Tagung des Unterauschusses für chemische Prüfung der ASMET in Zusammenarbeit mit dem Chemikerausschuss des Stahlinstitut VDEh, dem Deutschen Arbeitskreis für Analytische Spektroskopie (DAAS) und der Swiss Association for Spectrometry (SASP).

IFM 2017

IFM 2017

11 - 14 September 2017 in Graz

20th International Forgemasters Meeting

 

 

Materials Testing 2017

Materials Testing 2017

Materials Testing – the most comprehensive exhibition in the world of testing for quality, non-destructive testing (NDT), materials testing, condition monitoring and diagnostic technology – returns in 2017 with a new range of features and industry speakers.

Contemporary NDT in Engineering

Contemporary NDT in Engineering

The aim of the 14th International Conference is to bring together colleagues from academia and industry in all novel NDT related research areas and applications.

 

EUROCORR 2017

EUROCORR 2017

EUROCORR 2017 and 20th International Corrosion Congress
from 3-7 Spetember 2017 in Prague

 

9th ECCC

9th ECCC

June 26-29, 2017 in Vienna at Austria Center Vienna

9th European Continuous Casting Conference together with the 3rd European Steel Technology and Application Days

 

3rd ESTAD 2017

3rd ESTAD 2017

June 26-29, 2017 in Vienna, Austria Center Vienna

3rd European Steel Technology and Application Days together with the 9th European Continuous Casting Conference

  

Condition Monitoring

Condition Monitoring

First World Congress on Condition Monitoring

13-16 June, 2017 at ILEC Conference Centre, London

Certification 2017

Certification 2017

We are delighted to have the honour of inviting the international NDT specialists dealing with qualification and certification of NDT personnel to meet in Vienna at the 8th Certification 2017 from 6 to 7 June.

DGZfP-Jahrestagung 2017

DGZfP-Jahrestagung 2017

Treffen Sie Geschäftspartner, ZfP-Experten, Freunde und erfahren Sie die neuesten Erkenntnisse der ZfP! Genießen Sie Koblenz, die spannende Stadt am Zusammenfluss von Rhein und Mosel.

iCT 2017

iCT 2017

The 7th Conference on Industrial Computed Tomography, iCT2017 will be organized in Leuven, Belgium on 7-9 February 2017.

OPMR 2016 Conference

OPMR 2016 Conference

Opportunities in Processing of Metal Recources

Metal Additive Manu- facturing Conference

Metal Additive Manu- facturing Conference

Industrial perspectives in Additive Technologies

Condition Monitoring & Machinery Failure Prevention

Condition Monitoring & Machinery Failure Prevention

Thirteenth International Conference (CM2016 / MFPT2016), being organised by The British Institute of NDT in co-operation and partnership with the US Society for MFPT.

7th ECIC Congress

7th ECIC Congress

7th European Coke and Ironmaking Congress 2016, September 12-14 in Linz

Pressure equipment regulatory & standards development

Pressure equipment regulatory & standards development

ESOPE 2016: Tradeshow on pressure equipment regulatory and standards developments in sectors such as nuclear, chemical, petrochemical, food-processing, pharmacy…

Special Session on Digital Radiography/CT

Special Session on Digital Radiography/CT

Special Session on Digital Radiography/CT at the 43th Annual Review of Progress in Quantitative Nondestructive Evaluation

 

Symposium on Laser Ultrasonics

Symposium on Laser Ultrasonics

July 4 - 8, 2016 in Linz
5th international Symposium on Laser Ultrasonics and Advanced Sensing

19. ZfP - Weltkonferenz

19. ZfP - Weltkonferenz

World Conference on Non-Destructive Testing

www.wcndt2016.com

Rolling 2016

Rolling 2016

6. - 9. June in Graz
10th International Rolling Conference and the 7th European Rolling Conference

Metal Magnetic Memory Method

Metal Magnetic Memory Method

The International Conference on Diagnostics of Structures and Components using Metal Magnetic Memory Method.

7. Ã?GfZP Netzwerk ZfP

7. Ã?GfZP Netzwerk ZfP

Einblick in die Entwicklung neuer Technologien und in spezielle praktische Anwendungen am 12. Mai im Rahmen der Intertool Wien.

ASMET-Forum: CHINA-Chancen und Risiken

ASMET-Forum: CHINA-Chancen und Risiken

10.-11. MAI 2016, Montanuniversiät Leoben

„CHINA - Chancen & Risken“ - Chancen und Herausforderungen für die österreichische Industrie durch China? China als Partner? Bedrohung durch China?

Kunststoff-Kolloquium

Kunststoff-Kolloquium

Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt

iCT Conference 2016

iCT Conference 2016

6th Conference on Industrial Computed Tomography

Mobile Härteprüfung an metallischen Werkstoffen

Mobile Härteprüfung an metallischen Werkstoffen

Mobile Härteprüfung in Theorie und Praxis mit Abschlussprüfung

29. Internationales Forum für industrielle Instandhaltung

29. Internationales Forum für industrielle Instandhaltung

7. - 8.10. in Bad Erlach
Smart Maintenance - Intelligente, lernorientierte Instandhaltung

SEGGAU 2015

SEGGAU 2015

Numerical Analysis of Weldability

Liquid Metal Processing & Casting Conference

Liquid Metal Processing & Casting Conference

A unique symposium that showcases the latest technological and scientific advances related to those industrial processes used to cast large ingots of highly alloyed metals.

International Symposium NdT Civil Engineering

International Symposium NdT Civil Engineering

Non-Destructive Testing in Civil Engineering (NDT-CE)

www.ndt-ce2015.net

8th European Stainless Steel & Duplex Stainless Steel Conference

8th European Stainless Steel & Duplex Stainless Steel Conference

The conference aims at gathering and sharing information on all aspects of production technology of stainless steels such as hot and cold rolling, heat treatment and so on.

ESAFORM 2015

ESAFORM 2015

Conference on Material Forming

International NDT & Technical Diagnostics Exhibition & Conference

International NDT & Technical Diagnostics Exhibition & Conference

On behalf of Kazakhstan Exhibition company Iteca it is our pleasure to invite you to attend the 1st Kazakhstan International NDT & Technical Diagnostics Exhibition and Conference.

Exhibition NDT Territory 2015 in Moscow

Exhibition NDT Territory 2015 in Moscow

The second exhibition for equipment and technologies of NdT of the Russian Society for Non-Destructive Testing and Technical Diagnostics

Metal Additive Manufacturing Conference 2014

Metal Additive Manufacturing Conference 2014

The Metal Additive Manufacturing Conference is the first event in Austria that will focus exclusively on processing metallic materials and that will cover the entire value chain in this manufacturing process.

28. Internationales Forum für industrielle Instandhaltung

28. Internationales Forum für industrielle Instandhaltung

8. - 9. Oktober 2014 im Hotel Linsberg Asia, Bad Erlach

14. Metallografie-Tagung

14. Metallografie-Tagung

17. - 19. September 2014 in Leoben

Netzwerk ZfP am 8. Mai in Wien

Netzwerk ZfP am 8. Mai in Wien

6. Regionalveranstaltung der ÖGfZP am 8. Mai 2014 in Wien
im Rahmen der Messe Intertool/Schweissen

Ort:      Messezentrum; Messeplatz 1; 1020 Wien; Leharsaal 1

Vortragsprogramm und Anmeldung
 

MATEST 2013

MATEST 2013

10. - 11. Oct. 2013 in Zagreb

FATIGUE 2014

FATIGUE 2014

2. - 7. March 2014 in Melbourne

ICT Conference 2014

ICT Conference 2014

5th Conference on Industrial Computed Tomography
25. - 28.2.2014, Wels

NDT Inspection for Plastic Pipes

NDT Inspection for Plastic Pipes

4. - 5. February in Berlin

Materials Testing 2013

Materials Testing 2013

September 10-12, 2013 in Telford, UK

ICNDT 2013: 12th International NDT Conference

ICNDT 2013: 12th International NDT Conference

Application of Contemporary Non-Destructive Testing in Engineering
4. - 6. September 2013 in Portorož-Slovenia

5. Regionalveranstaltung

5. Regionalveranstaltung

10. und 11.Oktober 2012 in Wien

Download Ankündigung

Conference on Industrial Computed Tomography

Conference on Industrial Computed Tomography

19th to 21st September 2012, FH OÖ Campus Wels

DACH Jahrestagung 2012 - Zerstörungsfreie Materialprüfung

DACH Jahrestagung 2012 - Zerstörungsfreie Materialprüfung

ZfP in Forschung, Entwicklung und Anwendung, Graz  vom 17.-19.September 2012